Configuring Workload Identity and AWS OIDC Federation

Teleport Workload Identity issues flexible short-lived identities in JWT format. AWS OIDC Federation allows you to use these JWTs to authenticate to AWS services.

This can be useful in cases where a machine needs to securely authenticate with AWS services without the use of a long-lived credential. This is because the machine can authenticate with Teleport without using any shared secrets by using one of our delegated join methods.

In this guide, we'll configure Teleport Workload Identity and AWS to allow our workload to authenticate to the AWS S3 API and upload content to a bucket.

How it works

This implementation differs from using the Teleport Application Service to protect AWS APIs in a few ways:

• Requests to AWS are not proxied through the Teleport Proxy Service, meaning reduced latency but also less visibility, as these requests will not be recorded in Teleport's audit log.
• Workload Identity works with any AWS client, including the command-line tool but also their SDKs.
• Using the Teleport Application Service to access AWS does not work with Machine ID and therefore cannot be used when a machine needs to authenticate with AWS.

OIDC Federation vs Roles Anywhere

The AWS platform offers two routes for workload identity federation: OIDC Federation and Roles Anywhere. Teleport Workload Identity supports both of these methods.

There are a number of differences between the two methods:

• OIDC Federation exchanges a JWT SVID for an AWS credential, whereas Roles Anywhere exchanges an X509 SVID for an AWS credential. The use of X509 SVIDs is generally considered more secure.
• OIDC Federation does not require the additional installation of an AWS credential helper alongside workloads, whereas Roles Anywhere does.
• OIDC Federation requires that your Teleport Proxy Service is reachable by AWS, whereas Roles Anywhere does not.

This guide covers configuring OIDC federation. For Roles Anywhere, see Configuring Workload Identity and AWS Roles Anywhere.

Prerequisites

• A running Teleport cluster version 16.4.6 or above. If you want to get started with Teleport, sign up for a free trial or set up a demo environment.

• The tctl admin tool and tsh client tool.

  Visit Installation for instructions on downloading tctl and tsh.

• To check that you can connect to your Teleport cluster, sign in with tsh login, then verify that you can run tctl commands using your current credentials. For example:

  tsh login --proxy=teleport.example.com --user=[email protected]
  tctl status
  Cluster  teleport.example.com
  Version  16.4.6
  CA pin   sha256:abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678

  If you can connect to the cluster and run the tctl status command, you can use your current credentials to run subsequent tctl commands from your workstation. If you host your own Teleport cluster, you can also run tctl commands on the computer that hosts the Teleport Auth Service for full permissions.
• tbot must already be installed and configured on the host where the workloads which need to access Teleport Workload Identity will run. For more information, see the deployment guides.

Deciding on a SPIFFE ID structure

Within Teleport Workload Identity, all identities are represented using a SPIFFE ID. This is a URI that uniquely identifies the entity that the identity represents. The scheme is always spiffe://, and the host will be the name of your Teleport cluster. The structure of the path of this URI is up to you.

For the purposes of this guide, we will be granting access to AWS to the spiffe://example.teleport.sh/svc/example-service SPIFFE ID.

If you have already deployed Teleport Workload Identity, then you will already have a SPIFFE ID structure in place. If you have not, then you will need to decide on a structure for your SPIFFE IDs.

If you are only using Teleport Workload Identity with AWS OIDC Federation, you may structure your SPIFFE IDs so that they explicitly specify the AWS role they are allowed to assume. However, it often makes more sense to name the workload or person that will use the SPIFFE ID. See the best practices guide for further advice.

Step 1/4. Configure AWS

Configuring AWS OIDC Federation for the first time involves a few steps. Some of these may not be necessary if you have previously configured AWS OIDC Federation for your Teleport cluster.

Create an OpenID Connect Identity Provider

First, you'll need to create an OIDC identity provider in AWS. This will define a trust relationship between AWS and your Teleport cluster's Workload Identity issuer. You can reuse this OIDC identity provider to grant different workloads using Teleport Workload Identity access to AWS services.

When configuring the provider, you need to specify the issuer URI. This will be the public address of your Teleport Proxy Service with the path /workload-identity appended. Your Teleport Proxy Service must be accessible by AWS in order for OIDC federation to work.

curl https://example.teleport.sh/webapi/thumbprint
"example589ee4bf31a11b78c72b8d13f0example"%

resource "aws_iam_openid_connect_provider" "example_teleport_sh_workload_identity" {
  // Replace "example.teleport.sh" with the hostname used to access your
  // Teleport Proxy Service.
  url = "https://example.teleport.sh/workload-identity"

  client_id_list = [
    "sts.amazonaws.com",
  ]

  thumbprint_list = [
    // Replace with the thumbprint you determined using curl.
    "example589ee4bf31a11b78c72b8d13f0example"
  ]
}

Create an S3 bucket

For the purposes of this guide, you'll be granting the workload access to an AWS S3 bucket. Before we can dive into configuring the RBAC, we'll need to create our bucket.

You can omit this step if you wish to grant access to a different service within AWS.

// Create an S3 bucket
resource "aws_s3_bucket" "example" {
  // Replace "example" with a meaningful, unique name.
  bucket = "workload-id-demo"
}

Configure RBAC

Create an IAM Policy

First, create an IAM policy that will grant access to the S3 bucket. Later, you'll attach this to a role that the workload will assume.

The examples in this guide will create an IAM policy that will grant full access to the example bucket. In a production environment, you should modify this to grant the least privileges necessary.

resource "aws_iam_policy" "example" {
  // Choose a unique, meaningful name that describes what the policy grants
  // access to.
  name        = "workload-id-s3-full-access"
  path        = "/"

  // This example policy grants full access to AWS S3. In production, you
  // may wish to grant a less permissive policy.
  policy = jsonencode({
    Version = "2012-10-17"
    Statement = [{
      Action = "s3:*"
      Effect = "Allow"
      Resource = [
        aws_s3_bucket.workload_id_demo.arn,
        "${aws_s3_bucket.workload_id_demo.arn}/*"
      ]
    }]
  })
}

Create an IAM Role

Now, you'll create an IAM role. This role will be assumed by the workload after it authenticates to AWS using the JWT SVID issued by Teleport Workload Identity.

When creating the IAM role, you'll define a trust policy that controls which workload identities are able to assume the role. This policy will contain conditions which will be evaluated against the claims within the JWT SVID issued by Teleport Workload Identity. In our case, the only claim we want to evaluate is the sub claim, which will contain our workload's SPIFFE ID.

Finally, we'll attach the IAM policy we created earlier to this role to grant it the privileges specified within the policy.

// Create a role that the workload identity will assume.
resource "aws_iam_role" "example" {
  // Choose a unique, meaningful name that describes the role and the workload
  // that will assume it.
  name = "workload-id-demo"
  assume_role_policy = jsonencode({
    Version = "2012-10-17"
    Statement = [{
      Effect = "Allow"
      Principal = {
        Federated = aws_iam_openid_connect_provider.example.arn
      }
      Action = "sts:AssumeRoleWithWebIdentity"
      Condition = {
        StringEquals = {
          "${aws_iam_openid_connect_provider.example.url}:aud" = "sts.amazonaws.com"
          "${aws_iam_openid_connect_provider.example.url}:sub" = "spiffe://example.teleport.sh/svc/example-service"
        }
      }
    }]
  })
}

// Attach the policy we created earlier to our role.
resource "aws_iam_role_policy_attachment" "example" {
    role       = aws_iam_role.example.name
    policy_arn = aws_iam_policy.example.arn
}

Step 2/4. Configure Teleport RBAC

Now we need to configure Teleport to allow a JWT to be issued containing the SPIFFE ID we have chosen.

Create role.yaml with the following content:

kind: role
version: v6
metadata:
  name: my-workload-aws
spec:
  allow:
    spiffe:
      - path: /svc/example-service

Replace:

• my-workload-aws with a descriptive name for the role.
• /svc/example-service with the path part of the SPIFFE ID you have chosen.

Apply this role to your Teleport cluster using tctl:

tctl create -f role.yaml

You now need to assign this role to the bot:

tctl bots update my-bot --add-roles my-workload-aws

Step 3/4. Issue Workload Identity JWTs

You'll now configure tbot to issue and renew the short-lived JWT SVIDs for your workload. It'll write the JWT as a file on disk, where you can then configure AWS clients and SDKs to read it.

Take your already deployed tbot service and configure it to issue SPIFFE SVIDs by adding the following to the tbot configuration file:

outputs:
  - type: spiffe-svid
    destination:
      type: directory
      path: /opt/workload-identity
    svid:
      path: /svc/example-service
    jwts:
      - audience: sts.amazonaws.com
        file_name: aws-jwt

Replace:

• /opt/workload-identity with the directory where you want the JWT to be written.
• /svc/example-service with the SPIFFE ID you have chosen.

Restart your tbot service to apply the new configuration. You should see a file created at /opt/workload-identity/aws-jwt containing the JWT.

Step 4/4. Configure AWS CLIs and SDKs

Finally, you need to configure the AWS CLIs and SDKs to use the JWT SVID for authentication.

This can be done using the configuration file located at ~/.aws/config or by using environment variables.

To proceed, you'll need to know the ARN of the role you created earlier.

# You can replace "workload-id-demo" with a recognizable name that identifies
# your use-case.
[profile workload-id-demo]
# Replace with the ARN of the role you created earlier.
role_arn=arn:aws:iam:123456789012:role/workload-id-demo
# Replace with the directory and file name you configured `tbot` to write the
# JWT to.
web_identity_token_file=/opt/workload-identity/aws-jwt

You can now test authenticating to the AWS S3 API. Create a file which you can upload to your bucket:

echo "Hello, World!" > hello.txt

Now, use the AWS CLI to upload this file to your bucket:

aws s3 cp hello.txt s3://workload-id-demo

If everything is configured correctly, you should see this file uploaded to your bucket:

aws s3 ls s3://workload-id-demo

Inspecting the audit logs on CloudTrail should indicate that the request was authenticated using Workload Identity and specify the SPIFFE ID of the workload that made the request.

Next steps

• AWS OIDC Federation: The official AWS documentation for OIDC federation.
• AWS CLI documentation: The official AWS CLI documentation for configuring a role to be assumed.
• Workload Identity Overview: Overview of Teleport Workload Identity.
• JWT SVID Overview: Overview of the JWT SVIDs issued by Teleport Workload Identity.
• Best Practices: Best practices for using Workload Identity in Production.
• Read the configuration reference to explore all the available configuration options.