Skip to main content
Version: 14.x

Configure Teleport to Create Host Users

Teleport's SSH Service can be configured to automatically create local Unix users upon login.

This saves you from having to manually create users for each member of an organization and provides more fine-grained control of permissions on a given host. Host users created by Teleport are transient and will be deleted at the end of an SSH session.

Prerequisites​

  • A running Teleport cluster version 14.3.33 or above. If you want to get started with Teleport, sign up for a free trial or set up a demo environment.

  • The tctl admin tool and tsh client tool.

    Visit Installation for instructions on downloading tctl and tsh.

  • A running Teleport Node. See the Server Access Getting Started Guide for how to add a Node to your Teleport cluster.
  • The following utilities should be available in the PATH for the Teleport SSH Service, since it must execute these commands in order to create transient users:
    • useradd
    • userdel
    • usermod
    • groupadd
    • getent
    • visudo
  • To check that you can connect to your Teleport cluster, sign in with tsh login, then verify that you can run tctl commands using your current credentials. tctl is supported on macOS and Linux machines. For example: 
    $ tsh login --proxy=teleport.example.com [email protected]
    $ tctl status
    # Cluster  teleport.example.com
    # Version  14.3.33
    # CA pin   sha256:abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678
    If you can connect to the cluster and run the tctl status command, you can use your current credentials to run subsequent tctl commands from your workstation. If you host your own Teleport cluster, you can also run tctl commands on the computer that hosts the Teleport Auth Service for full permissions.

Step 1/3. Configure a role​

First, create a role with create_host_user_mode set to drop, insecure-drop, or keep.

  • insecure-drop will create transient users that are deleted once the session ends.
  • drop is the same as insecure-drop except it also creates a home directory for the user. It exists only for backwards compatibility; newly configured services should use insecure-drop instead.
  • keep will create permanent users on the host at login time.

Note that with the drop and insecure-drop modes, it is possible for a created user to get the same UID as a previously deleted user, which would give the new user access to all of the old user's files if they are not deleted.

note

drop mode will be removed in Teleport 15.

The following role specification will allow users to log in as nginxrestarter on any matching Node. The host user will be created and added to the groups listed in host_groups. They will also be given permission to restart the Nginx service as root.

Save the file below as auto-users.yaml

kind: role
version: v5
metadata:
  name: auto-users
spec:
  options:
    # Allow automatic creation of users.
    create_host_user_mode: drop
  allow:
    logins: [ "nginxrestarter" ]
    # List of host groups the created user will be added to. Any that don't already exist are created.
    host_groups: [ubuntu, nginx, other]
    # List of entries to include in a temporary sudoers file created in /etc/sudoers.d
    host_sudoers: [
       # This line will allow the `nginxrestarter` user to run
       # `systemctl restart nginx.service` as
       # root without requiring a password.
       # The sudoers entries will be prefixed with `nginxrestarter` in this case.
       # sudoers file reference documentation: https://www.sudo.ws/docs/man/1.8.17/sudoers.man/
       "ALL = (root) NOPASSWD: /usr/bin/systemctl restart nginx.service"
    ]
    node_labels:
      'env': 'devel'

Create the role:

$ tctl create -f auto-users.yaml
# role 'auto-users' has been created

Each value of the logins field must conform to the username requirements of the Linux distribution being used. See User/Group Name Syntax for requirements in common distributions.

warning

When a Teleport user accesses an SSH Service instance, Teleport checks each of the user's roles that match the instance. If at least one role matches the instance but does not specify create_host_user_mode to be either keep, drop, or insecure-drop, automatic user creation will be disabled. Roles that do not match the server will not be checked.

If multiple roles match where one might specify keep and another drop, Teleport will default to keep, retaining the user on the server after the session ends.

warning

When multiple roles contain host_sudoers entries, the sudoers file will have the entries written to it ordered by role name

If a role includes a deny rule that sets host_sudoers to '*', the user will have all sudoers entries removed when accessing matching Nodes, otherwise deny rules are matched literally when filtering:

kind: role
version: v5
metadata:
  name: auto-users
spec:
  options:
    create_host_user_mode: drop
  deny:
    host_sudoers: [
       "*" # ensure that users in this role never have sudoers files created on matching Nodes
       "ALL=(ALL) NOPASSWD: ALL" # host_sudoers entries matching this are filtered out
    ]
    node_labels:
      'env': 'devel'

If an SSH Node must never allow the automatic creation of transient Unix users you can set disable_create_host_user to true in the Node's configuration:

# teleport.yaml
teleport:
  nodename: node
ssh_service:
  enabled: true
  # Disable automatic host user creation on this Node, regardless of role permissions.
  disable_create_host_user: true

Assign the auto-users role to your Teleport user by running the appropriate commands for your authentication provider:

  1. Retrieve your local user's configuration resource:

    $ tctl get users/$(tsh status -f json | jq -r '.active.username') > out.yaml

  2. Edit out.yaml, adding auto-users to the list of existing roles:

      roles:
       - access
       - auditor
       - editor
    +  - auto-users

  3. Apply your changes:

    $ tctl create -f out.yaml

  4. Sign out of the Teleport cluster and sign in again to assume the new role.

Step 2/3. [Optional] Configure the UID and GID for the created users​

If the user has the host_user_uid and host_user_gid traits specified, when the host user is being created the UID and GID will be set to those values.

These values can either be set manually when creating or updating the user through tctl, or it can be set via SSO attributes of the same name.

If a group with the specified GID does not already exist, a group will be created with the same login name as the user being created.

kind: user
metadata:
  name: some_teleport_user
spec:
  ...
  traits:
    logins:
    - root
    - alex
    host_user_gid:
    # gid and uid values must be quoted.
    - "1234"
    host_user_uid:
    - "5678"
warning

If multiple entries are specified in the host_user_uid or host_user_gid only the first entry will be used.

Step 3/3 Test host user creation​

When you connect to a remote Node via tsh, and host user creation is enabled, the Teleport SSH Service will automatically create a user on the host:

$ tsh login
$ tsh ssh nginxrestarter@develnode
$ grep "nginxrestarter" /etc/passwd
# nginxrestarter:x:1001:1003::/home/nginxrestarter:/bin/bash
$ grep "other" /etc/group
# other:x:1002:nginxrestarter
$ exit
$ tsh ssh admin@develnode # checking the user was deleted after logout
$ grep "nginxrestarter" /etc/passwd
$ echo $?
# 1

When the user above logs in, the nginxrestarter user and any groups that do not already exist are created on the host. The nginxrestarter user is added to the ubuntu, nginx, and other groups, as specified in the host_groups field.

The Teleport SSH Service executes useradd to create new users on the host, and returns an error if it cannot find the useradd binary. The useradd command creates a new home directory with the name of the new host user and adds the user to the groups specified in the Teleport user's roles.

The SSH Service executes useradd --no-create-home --home-dir <home> <username> --groups <groups> --uid <uid> --gid <gid> when adding a user, with all other options using system defaults. For example, it associates the user with the default login shell for the host, which you can specify by setting the SHELL field in /etc/default/useradd. See the useradd manual for your system for a full description of the default behavior.

The Teleport SSH Service also creates a file in /etc/sudoers.d with the contents of the host_sudoers file written with one entry per line, each prefixed with the username of the user that has logged in.

The session can then proceed as usual, however once the SSH session ends, the user will be automatically removed and their home directory will be deleted with userdel --remove <username>, as the matching role specified they should be dropped. Files owned by the deleted user, created outside the home directory, will remain in place. Groups that were created will remain on the system after the session ends.

Should a Teleport SSH instance be restarted while a session is in progress, the user will be cleaned up at the next Teleport restart.

Migrating unmanaged users​

Host users created with create_host_user_mode: keep prior to v14.3.24, v15.4.16, and v16.1.8 will not be managed by later versions of Teleport. In order to migrate these users automatically on their next session, you can add teleport-keep to your role's host_groups. Host users can also be migrated manually by adding them to the teleport-keep group directly on the hosts you wish to migrate.

Next steps​