SSO with Active Directory Federation Services

This guide will explain how to configure Active Directory Federation Services (ADFS) to be a single sign-on (SSO) provider to issue login credentials to specific groups of users. When used in combination with role based access control (RBAC), it allows Teleport administrators to define policies like:

• Only members of "DBA" group can SSH into machines running PostgreSQL.
• Developers must never SSH into production servers.

Prerequisites

• ADFS installation with Admin access and users assigned to at least two groups.
• Teleport role with access to maintaining saml resources. This is available in the default editor role.

• A running Teleport cluster. If you want to get started with Teleport, sign up for a free trial.

• The tctl admin tool and tsh client tool.

  Visit Installation for instructions on downloading tctl and tsh.

• To check that you can connect to your Teleport cluster, sign in with tsh login, then verify that you can run tctl commands using your current credentials. For example:

  $ tsh login --proxy=teleport.example.com [email protected]
  $ tctl status
  # Cluster  teleport.example.com
  # Version  16.4.7
  # CA pin   sha256:abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678
  If you can connect to the cluster and run the tctl status command, you can use your current credentials to run subsequent tctl commands from your workstation. If you host your own Teleport cluster, you can also run tctl commands on the computer that hosts the Teleport Auth Service for full permissions.

Step 1/3. Configure ADFS

You'll need to configure ADFS to export claims about a user (Claims Provider Trust in ADFS terminology) and you'll need to configure ADFS to trust Teleport (a Relying Party Trust in ADFS terminology).

For Claims Provider Trust configuration, open the AD FS management window. Under Claims Provider Trusts, right-click on Active Directory and select Edit Claim Rules. You'll need to specify at least the following two incoming claims: Name ID and Group.

• Name ID should be a mapping of the LDAP Attribute E-Mail-Addresses to Name ID.

  

• A group membership claim should be used to map users to roles (for example to separate normal users and admins).

  

• If you are using dynamic roles (see below), it may be useful to map the LDAP Attribute SAM-Account-Name to Windows account name:

  

• And create another mapping of E-Mail-Addresses to UPN:

  

You'll also need to create a Relying Party Trust. Use the below information to help guide you through the Wizard.

• Create a Relaying Party Trust:
• Enter data about the relying party manually.
• Set the display name to something along the lines of Teleport.
• Skip the token encryption certificate.
• Select "Enable support for SAML 2.0 Web SSO protocol" and set the URL to https://teleport.example.com/v1/webapi/saml/acs, replacing the domain name with your Teleport proxy URL.
• Set the relying party trust identifier to https://teleport.example.com/v1/webapi/saml/acs as well.
• For access control policy select "Permit everyone".

Once the Relying Party Trust has been created, update the Claim Issuance Policy for it. Like before, make sure you send at least Name ID and Group claims to the relying party (Teleport). If you are using dynamic roles, it may be useful to map the LDAP Attribute SAM-Account-Name to "Windows account name" and create another mapping of E-Mail-Addresses to "UPN".

Lastly, ensure the user you create in Active Directory has an email address associated with it. To check this open Server Manager then "Tools -> Active Directory Users and Computers" and select the user and right click and open properties. Make sure the email address field is filled out.

Step 2/3. Create Teleport roles

Let's create two Teleport roles: one for administrators and the other for normal users. You can create them using the tctl create {file name} CLI command or via the Web UI.

# admin-role.yaml
kind: "role"
version: "v3"
metadata:
  name: "admin"
spec:
  options:
    max_session_ttl: "8h0m0s"
  allow:
    logins: [ root ]
    node_labels:
      "*": "*"
    rules:
      - resources: ["*"]
        verbs: ["*"]

# user-role.yaml
kind: "role"
version: "v3"
metadata:
  name: "dev"
spec:
  options:
    # regular users can only be guests and their certificates will have a TTL of 1 hour:
    max_session_ttl: "1h"
  allow:
    # only allow login as either ubuntu or the 'windowsaccountname' claim
    logins: [ '{{external["http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname"]}}', ubuntu ]
    node_labels:
      "access": "relaxed"

This role declares:

• Devs are only allowed to log in to nodes labeled access: relaxed.
• Developers can log in as the ubuntu user.
• Developers will not be able to see or replay past sessions or re-configure the Teleport cluster.

The login {{external["http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname"]}} configures Teleport to look at the http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname attribute and use that field as an allowed login for each user. Since the name of the attribute contains characters besides letters, numbers, and underscores, you must use double quotes (") and square brackets ([]) around the name of the attribute.

Step 3/3. Create a SAML connector

Create a SAML connector resource using tctl:

$ tctl sso configure saml --acs https://teleport.example.com/v1/webapi/saml/acs \
  --preset adfs \
  --entity-descriptor https://adfs.example.com/FederationMetadata/2007-06/FederationMetadata.xml \
  --attributes-to-roles http://schemas.xmlsoap.org/claims/Group,teleadmins,editor \
  --attributes-to-roles http://schemas.xmlsoap.org/claims/Group,Users,access \
  > adfs.yaml

The acs field should match the value you set in ADFS earlier and you can obtain the entity_descriptor_url from ADFS under "ADFS -> Service -> Endpoints -> Metadata".

The attributes_to_roles is used to map attributes to the Teleport roles you just created. In our situation, we are mapping the "Group" attribute whose full name is http://schemas.xmlsoap.org/claims/Group with a value of "teleadmins" to the "editor" role. Groups with the value "users" is being mapped to the "users" role.

You can test this connector before applying it (cat adfs.yaml | tctl sso test), but until we complete the next step the authentication process will not complete.

Apply the connector:

$ tctl create -f adfs.yaml

Export the signing key

For the last step, you'll need to export the signing key:

$ tctl saml export adfs > saml.cer

Copy saml.cer, to ADFS server, open the "Relying Party Trust" and add this file as one of the signature verification certificates:

The Web UI will now contain a new button: "Login with MS Active Directory". The CLI is the same as before:

$ tsh --proxy=proxy.example.com login

This command will print the SSO login URL and try to open it automatically in a browser.

Tip

Teleport can use multiple SAML connectors. In this case a connector name can be passed via tsh login --auth=connector_name

Enable default SAML authentication

Configure Teleport to use SAML authentication as the default instead of the local user database.

Use tctl to edit the cluster_auth_preference value:

$ tctl edit cluster_auth_preference

Set the value of spec.type to saml:

kind: cluster_auth_preference
metadata:
  ...
  name: cluster-auth-preference
spec:
  ...
  type: saml
  ...
version: v2

After you save and exit the editor, tctl will update the resource:

cluster auth preference has been updated

tip

If you need to log in again before configuring your SAML provider, use the flag --auth=local.

Troubleshooting

Troubleshooting SSO configuration can be challenging. Usually a Teleport administrator must be able to:

• Be able to see what SAML/OIDC claims and values are getting exported and passed by the SSO provider to Teleport.
• Be able to see how Teleport maps the received claims to role mappings as defined in the connector.
• For self-hosted Teleport Enterprise clusters, ensure that HTTP/TLS certificates are configured properly for both the Teleport Proxy Service and the SSO provider.

If something is not working, we recommend to:

• Double-check the host names, tokens and TCP ports in a connector definition.

Using the Web UI

If you get "access denied" or other login errors, the number one place to check is the Audit Log. Under the Management area you can access it within the Activity tab in the Teleport Web UI.

Example of a user being denied because the role clusteradmin wasn't set up:

{
  "code": "T1001W",
  "error": "role clusteradmin is not found",
  "event": "user.login",
  "method": "oidc",
  "success": false,
  "time": "2019-06-15T19:38:07Z",
  "uid": "cd9e45d0-b68c-43c3-87cf-73c4e0ec37e9"
}

Teleport does not show the expected Nodes

When Teleport's Auth Service receives a request to list Teleport Nodes (e.g., to display Nodes in the Web UI or via tsh ls), it only returns the Nodes that the current user is authorized to view.

For each Node in the user's Teleport cluster, the Auth Service applies the following checks in order and, if one check fails, hides the Node from the user:

• None of the user's roles contain a deny rule that matches the Node's labels.
• At least one of the user's roles contains an allow rule that matches the Node's labels.

If you are not seeing Nodes when expected, make sure that your user's roles include the appropriate allow and deny rules as documented in the Teleport Access Controls Reference.

When configuring SSO, ensure that the identity provider is populating each user's traits correctly. For a user to see a Node in Teleport, the result of populating a template variable in a role's allow.logins must match at least one of a user's traits.logins.

In this example a user will have usernames ubuntu, debian and usernames from the SSO trait logins for Nodes that have a env: dev label. If the SSO trait username is bob then the usernames would include ubuntu, debian, and bob.

kind: role
metadata:
  name: example-role
spec:
  allow:
    logins: ['{{external.logins}}', ubuntu, debian]
    node_labels:
      'env': 'dev'
version: v5

Single sign-on fails with OIDC

When encountering the error message "Failed to verify JWT: oidc: unable to verify JWT signature: no matching keys", it typically indicates a discrepancy between the algorithm used to sign the JWT token and the algorithm(s) supported by the JSON Web Key Set (JWKS). Specifically, the token might be signed with one algorithm, e.g., HS256, while the JWKS only lists keys for a different algorithm. e.g., RS256. This issue predominantly arises when using identity providers that offer extremely low-level functionality.

Here are some things to check:

• Verify the JWT header specifies the correct signing algorithm. This should match one of the algorithms listed in the keys section of the JWKS endpoint response.
• Ensure the JWKS endpoint is returning all relevant public keys. Sometimes key rotation can cause valid keys to be omitted.

To resolve the issue, align the JWT algorithm header with a supported algorithm in the JWKS. Rotate keys if necessary. Verify the JWKS only publishes the active public keys. With proper configuration, the signature should validate successfully.

Next steps

In the Teleport role we illustrated in this guide, external traits are replaced with values from the single sign-on provider that the user used to authenticate to Teleport. For full details on how traits work in Teleport roles, see the Teleport Access Controls Reference.