Skip to main content
Version: 17.x (unreleased)

Machine ID with Application Access

Teleport protects and controls access to HTTP and TCP applications. Machine ID can be used to grant machines secure, short-lived access to these applications.

In this guide, you will configure tbot to produce credentials that can be used to access an application enrolled in your Teleport cluster.

Prerequisites​

  • A running Teleport cluster version 17.0.0-dev or above. If you want to get started with Teleport, sign up for a free trial or set up a demo environment.

  • The tctl admin tool and tsh client tool.

    Visit Installation for instructions on downloading tctl and tsh.

  • If you have not already connected your application to Teleport, follow the Application Access Getting Started Guide.
  • To check that you can connect to your Teleport cluster, sign in with tsh login, then verify that you can run tctl commands using your current credentials. For example: 
    $ tsh login --proxy=teleport.example.com [email protected]
    $ tctl status
    # Cluster  teleport.example.com
    # Version  17.0.0-dev
    # CA pin   sha256:abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678
    If you can connect to the cluster and run the tctl status command, you can use your current credentials to run subsequent tctl commands from your workstation. If you host your own Teleport cluster, you can also run tctl commands on the computer that hosts the Teleport Auth Service for full permissions.
  • tbot must already be installed and configured on the machine that will access applications. For more information, see the deployment guides.

Step 1/3. Configure RBAC​

First, Teleport should be configured to allow the credentials produced by tbot to be used to connect to an Application. This is done by creating a role that grants the necessary permissions and then assigning this role to a Bot.

Create a file called role.yaml with the following content:

kind: role
version: v6
metadata:
  name: example-role
spec:
  allow:
    # Grants access to all applications.
    app_labels:
      '*': '*'

Replace example-role with a descriptive name related to your use case.

This grants access to all applications. In production environments you should modify these labels to grant access to only the applications that the machine will need access to.

Use tctl create -f ./role.yaml to create the role.

Now, use tctl bots update to add the role to the Bot. Replace example with the name of the Bot you created in the deployment guide and example-role with the name of the role you just created:

$ tctl bots update example --add-roles example-role

Step 2/3. Configure tbot​

There are two implementation options available when using tbot to grant a client access to an application. The option you choose will depend on your specific needs.

The first option is the application-tunnel service. This operates a local proxy that your client can connect to. The service will automatically attach the credentials to the connection, meaning that the client does not need to support client certificates. However, this does mean that the tbot process must be running for the client to access the application.

The second option is the application output. This will write TLS credentials to a destination where your client will read them from. The client must support client certificates and reloading them from disk when they are renewed. In addition, this option is not compatible with a TLS-terminating load-balancer between the client and the Teleport Proxy service. Unlike the application-tunnel, the tbot process does not need to be running for the client to access the application - this can be ideal for CI/CD pipelines.

If you aren't sure which to use, we recommend starting with the application-tunnel service as this is compatible with more clients.

To configure the application-tunnel service, first determine where you want the listener to bind to. As any client that can connect to the service listener will be able to access the application, it is recommended to bind to the loopback interface (e.g 127.0.0.1) as this will prevent access from other hosts.

Modify your tbot configuration to add an application-tunnel service:

services:
- type: application-tunnel
  app_name: dumper
  listen: tcp://127.0.0.1:1234

Replace:

  • dumper with the name of the application you registered in Teleport.
  • listen with the address and port you wish the service to bind to.

Restart tbot to apply the new configuration.

Step 3/3. Connect to your web application with the Machine ID identity​

Once the application-tunnel service has been configured, you can connect to the application using the listen address you specified.

For example, to access the application using curl:

$ curl http://127.0.0.1:1234/

Troubleshooting​

Client application requires certificates with standard extensions​

If your automated service requires TLS certificates with a specific file extension, you may also enable the specific_tls_naming option for the output:

outputs:
- type: application
  destination:
    type: directory
    path: /opt/machine-id
  app_name: grafana-example
  specific_tls_naming: true

This will generate tls.crt and tls.key inside /opt/machine-id with identical content to the certificate files listed above.

Clients are redirected to the Teleport login page​

As with human users, scripted clients will be redirected to the Teleport login page when attempting to access an app through the Teleport Proxy Service without valid credentials.

Ensure the bot's certificates have not expired and that the client application has been configured to use both the client certificate and key.

Next steps​

  • Review the Access Controls Reference to learn about restricting which Applications and other Teleport resources your bot may access.
  • Configure JWTs for your Application to remove the need for additional login credentials.
  • Read the configuration reference to explore all the available configuration options.