Skip to main content
Version: 15.x

Register a Kubernetes Cluster using IAM Joining

In this guide, we will show you how to register a Kubernetes cluster with Teleport by using the agent's IAM identity to automatically join the Teleport cluster.

You can register multiple Kubernetes clusters with Teleport by deploying the Teleport Kubernetes Service on each cluster you want to register without having to distribute a joining secret to the Kubernetes cluster.

Once the Kubernetes cluster is registered for the first time, the agent will store its Teleport identity in a Kubernetes secret. The agent will use this identity to automatically join the cluster on subsequent restarts.

Support for joining a cluster with the Proxy Service behind a layer 7 load balancer or reverse proxy is available in Teleport 13.0+.

Prerequisites​

  • A running Teleport cluster version 15.4.22 or above. If you want to get started with Teleport, sign up for a free trial or set up a demo environment.

  • The tctl admin tool and tsh client tool.

    On Teleport Enterprise, you must use the Enterprise version of tctl, which you can download from your Teleport account workspace. Otherwise, visit Installation for instructions on downloading tctl and tsh for Teleport Community Edition.

  • A Kubernetes cluster version >= v1.17.0
  • An existing IAM OpenID Connect (OIDC) provider for your cluster
  • Helm >= 3.4.2
  • AWS CLI >= 2.10.3 or 1.27.81

Verify that Helm and Kubernetes are installed and up to date.

$ helm version
# version.BuildInfo{Version:"v3.4.2"}

$ kubectl version
# Client Version: version.Info{Major:"1", Minor:"17+"}
# Server Version: version.Info{Major:"1", Minor:"17+"}
  • To check that you can connect to your Teleport cluster, sign in with tsh login, then verify that you can run tctl commands using your current credentials. tctl is supported on macOS and Linux machines. For example: 
    $ tsh login --proxy=teleport.example.com [email protected]
    $ tctl status
    # Cluster  teleport.example.com
    # Version  15.4.22
    # CA pin   sha256:abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678abdc1245efgh5678
    If you can connect to the cluster and run the tctl status command, you can use your current credentials to run subsequent tctl commands from your workstation. If you host your own Teleport cluster, you can also run tctl commands on the computer that hosts the Teleport Auth Service for full permissions.

Step 1/3. Create a Kubernetes service account with an IAM identity​

Teleport supports a mode where agents running in AWS can join the cluster using the IAM identity they are running as. It allows you to register Kubernetes clusters running in AWS without having to distribute a joining secret to the Kubernetes cluster.

To securely join the cluster without relying on the EKS node's Identity, a Teleport agent must run as a separate Kubernetes service account with an attached IAM role. Relying on the node's identity is not recommended as it can be easily compromised since every pod running on the node has access to the node's identity if IAM Roles for Service Accounts (IRSA) is not configured.

For IRSA to work correctly, it requires the Kubernetes cluster to have an IAM OpenID Connect that maps IAM roles to Kubernetes service accounts.

The Kubernetes service account must have access to the sts:GetCallerIdentity API but does not require any other permissions.

To create the IAM policy, run the following command:

$ cat >iam-policy.json <<EOF
{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": "sts:GetCallerIdentity",
            "Resource": "*"
        }
    ]
}
EOF

Then create the IAM policy:

$ aws iam create-policy --policy-name kube-iam-policy --policy-document file://iam-policy.json
{
    "Policy": {
        "PolicyName": "kube-iam-policy",
        "PolicyId": "ANPAW2Y2Q2Y2Y2Y2Y2Y2Y",
        "Arn": "arn:aws:iam::aws:policy/kube-iam-policy",
        "Path": "/",
        "DefaultVersionId": "v1",
        "AttachmentCount": 0,
        "PermissionsBoundaryUsageCount": 0,
        "IsAttachable": true,
        "Description": "",
        "CreateDate": "2021-03-18T15:12:00+00:00",
        "UpdateDate": "2021-03-18T15:12:00+00:00"
    }
}

Now we need to create the Kubernetes service account and map it to the IAM role. There are two ways of doing this. You can use eksctl if your cluster was provisioned using it or you can use the AWS CLI method.

eksctl supports automatic creation of new IAM roles and mapping it into the Kubernetes Service Account in the target namespace.

$ eksctl create iamserviceaccount \
    --name teleport-kube-agent-sa \
    --namespace teleport-agent \
    --cluster kube-cluster \
    --region aws-region \
    --attach-policy-arn arn:aws:iam::aws:policy/kube-iam-policy \
    --role-name kube-iam-role \
    --approve

The referenced parameters are:

  • teleport-kube-agent-sa is the name of the Kubernetes service account.
  • teleport-agent is the namespace where the Teleport Kubernetes Service is running.
  • aws-region is the AWS region where the cluster is running.
  • kube-iam-policy is the name of the IAM policy created in the previous step.
  • kube-cluster is the name of the Kubernetes cluster.
  • kube-iam-role is the name of the IAM role to create.

Once the command completes, you should see a new IAM role created in your AWS account and a new Kubernetes service account created in the target namespace.

Step 2/3. Create the AWS joining token​

Create a dynamic token which will allow agents from your AWS account to join your Teleport cluster using the roles defined.

Under the hood, Kubernetes Service instances will prove that they are running in your AWS account by sending a signed Identity Document which matches an allow rule configured in your AWS joining token.

Create the following token.yaml with an allow rule specifying your AWS account and the AWS ARN the agents will be running as.

$ cat >token.yaml <<EOF
kind: token
version: v2
metadata:
  # the token name is not a secret because instances must prove that they are
  # running in your AWS account to use this token
  name: kube-iam-token
spec:
  # use the minimal set of roles required
  roles: [Kube]
  # set the join method allowed for this token
  join_method: iam
  allow:
  # aws_arn is optional and allows you to restrict the IAM role of joining Agents
  # to a specific IAM role
  - aws_account: "$account_id"
    aws_arn: "arn:aws:sts::$account_id:assumed-role/kube-iam-role/*"
EOF

Run tctl create token.yaml to create the token.

Step 3/3. Deploy the Teleport Kubernetes Service​

Set up the Teleport Helm repository.

Allow Helm to install charts that are hosted in the Teleport Helm repository:

$ helm repo add teleport https://charts.releases.teleport.dev

Update the cache of charts from the remote repository so you can upgrade to all available releases:

$ helm repo update

Switch kubectl to the Kubernetes cluster and run:

# Deploy a Kubernetes agent. It dials back to the Teleport cluster tele.example.com.
$ CLUSTER=iam-cluster
$ PROXY=tele.example.com:443
# Install the Teleport Kubernetes agent. Does not create a service account and uses the existing
#   service account. See serviceAccount.create and serviceAccount.name parameters.
$ helm install teleport-agent teleport/teleport-kube-agent \
  --set kubeClusterName=${CLUSTER?} \
  --set roles="kube\,app\,discovery" \
  --set proxyAddr=${PROXY?} \
  --set joinParams.method=iam \
  --set joinParams.tokenName=kube-iam-token \
  --set serviceAccount.create=false \
  --set serviceAccount.name=teleport-kube-agent-sa \
  --create-namespace \
  --namespace=teleport-agent \
  --version 15.4.22

Make sure that the Teleport agent pod is running. You should see one Teleport agent pod pod with a single ready container:

$ kubectl -n teleport-agent get pods
NAME               READY   STATUS    RESTARTS   AGE
teleport-agent-0   1/1     Running   0          32s

List connected clusters using tsh kube ls and switch between them using tsh kube login:

$ tsh kube ls

# Kube Cluster Name Selected
# ----------------- --------
# iam-cluster

# kubeconfig now points to the iam-cluster cluster
$ tsh kube login iam-cluster
# Logged into Kubernetes cluster "iam-cluster". Try 'kubectl version' to test the connection.

# kubectl command executed on `iam-cluster` but is routed through the `tele.example.com` cluster.
$ kubectl get pods

If the agent pod is healthy and ready but you cannot see your Kubernetes cluster, it is likely related to RBAC permissions associated with your roles. On the other hand, if you can see your Kubernetes cluster but unable to see any pods, it's likely that your Teleport role does not allow access to pods in the Kubernetes cluster. For both cases, please refer to the section below.

Not seeing Kubernetes clusters?

To authenticate to a Kubernetes cluster via Teleport, your Teleport user's roles must allow access as at least one Kubernetes user or group.

  1. Retrieve a list of your current user's Teleport roles. The example below requires the jq utility for parsing JSON:

    $ CURRENT_ROLES=$(tsh status -f json | jq -r '.active.roles | join ("\n")')

  2. Retrieve the Kubernetes groups your roles allow you to access:

    $ echo "$CURRENT_ROLES" | xargs -I{} tctl get roles/{} --format json | \
      jq '.[0].spec.allow.kubernetes_groups[]?'

  3. Retrieve the Kubernetes users your roles allow you to access:

    $ echo "$CURRENT_ROLES" | xargs -I{} tctl get roles/{} --format json | \
      jq '.[0].spec.allow.kubernetes_users[]?'

  4. If the output of one of the previous two commands is non-empty, your user can access at least one Kubernetes user or group, so you can proceed to the next step.

  5. If both lists are empty, create a Teleport role for the purpose of this guide that can view Kubernetes resources in your cluster.

    Create a file called kube-access.yaml with the following content:

    kind: role
    metadata:
      name: kube-access
    version: v7
    spec:
      allow:
        kubernetes_labels:
          '*': '*'
        kubernetes_resources:
          - kind: '*'
            namespace: '*'
            name: '*'
            verbs: ['*']
        kubernetes_groups:
        - viewers
      deny: {}

  6. Apply your changes:

    $ tctl create -f kube-access.yaml

  7. Assign the kube-access role to your Teleport user by running the appropriate commands for your authentication provider:

    1. Retrieve your local user's roles as a comma-separated list:

      $ ROLES=$(tsh status -f json | jq -r '.active.roles | join(",")')

    2. Edit your local user to add the new role:

      $ tctl users update $(tsh status -f json | jq -r '.active.username') \
        --set-roles "${ROLES?},kube-access"

    3. Sign out of the Teleport cluster and sign in again to assume the new role.

  8. Configure the viewers group in your Kubernetes cluster to have the built-in view ClusterRole. When your Teleport user assumes the kube-access role and sends requests to the Kubernetes API server, the Teleport Kubernetes Service impersonates the viewers group and proxies the requests.

    Create a file called viewers-bind.yaml with the following contents, binding the built-in view ClusterRole with the viewers group you enabled your Teleport user to access:

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: viewers-crb
    subjects:
    - kind: Group
      # Bind the group "viewers", corresponding to the kubernetes_groups we assigned our "kube-access" role above
      name: viewers
      apiGroup: rbac.authorization.k8s.io
    roleRef:
      kind: ClusterRole
      # "view" is a default ClusterRole that grants read-only access to resources
      # See: https://kubernetes.io/docs/reference/access-authn-authz/rbac/#user-facing-roles
      name: view
      apiGroup: rbac.authorization.k8s.io

  9. Apply the ClusterRoleBinding with kubectl:

    $ kubectl apply -f viewers-bind.yaml

Next steps​

To see all of the options you can set in the values file for the teleport-kube-agent Helm chart, consult our reference guide.